GE KISS, Руководство по обслуживанию

Страница: 38 / 54

Maintenance, Cleaning and Troubleshooting (KISS™/KISS™ Multilead)
Clean the cables with a cloth moistened with soap water. Use a disinfectant for
disinfection of the leadwires and cables.
CAUTION:
EQUIPMENT DAMAGE - Under no circumstances should leadwires be immersed in
the cleaning solution or disinfectant.Even if the system were not under negative
pressure, the liquid would enter the system, spoiling the filter disks and clogging
the pneumatic system.
Cleaning Electrodes and Electrode Care
For a thorough cleaning the electrode cable (3) can be disconnected from the
electrode (4). When doing this it is practical to disconnect the cable plug.
The suction cup (6) can now be removed from the electrode. This permits access to
the filter disk (5), which can be replaced.
• The surface of electrodes with minor contamination can be cleaned with a cloth
moistened with water and detergent.
CAUTION:
EQUIPMENT DAMAGE - Do not scrape electrodes with metal objects.The
silver-silver chloride structure could be damaged by this and lose its stabilizing
effect on the electrode interface.
• To disinfect the electrodes, wipe them down with a cloth moistened with 80%
alcohol. All disinfectants containing alcohol can be used for disinfection.
CAUTION:
EQUIPMENT DAMAGE - After use do not immerse the electrodes into the
cleaning solution.The liquid entering the negative pressure system would soak
and hence spoil the filter disk.
• Observe the information given in the KISS™ Multilead Operator Manual.
For a system in frequent use replace the filter disks once a week!
Replacing Leadwires
The leadwires are subject to wear and tear and, therefore, they can be replaced. The
leadwires are available without the electrodes as spare parts (for Catalog Nos. see
Chapter 5 “Spare Parts List (KISS™/KISS™ Multilead)” on page 41 ).
The leadwires are plugged into the distributor head for easy replacement. When
removing the lead pull on the plug. When plugging in a new lead do not use force; the
pneumatic and electrical plug-in connectors could become damaged.
38
KISS™ / KISS™ Multilead
22745010H