GE K0470, Руководство пользователя

Страница: 22 / 78

PACE Pressure Indicators User Manual
[EN] English 2 - 11 K0470 Revision A
Communication Connections
Connect the applicable connectors into the rear panel communications ports and, if appropriate,
secure with the captive screws.
Note: The RS232 and IEEE 488 interfaces are both enabled at power-up. Set the required parameters
in Supervisor Setup/communications
menu, see Section 3.6.
Figure 2-7, Communication Connectors
RS232 Interface
When using the RS232 interface, a cable must be connected directly from the instrument to a
suitable port on the computer in a ‘point to point’ link.
The pin connections for the 9-pin D-type, RS232 connector and the relationship between the
instrument and the RS232 control signals, together with device interconnection interface is shown
in Table 2-1. The instrument is configured as Data Circuit Terminating Equipment (DCE).
1
Power supply adaptor 2 RS232 4 IEEE488
5
USB B 6 USB A 7 Ethernet
2
4
5
6
7
22V to 26V
ANALOGUE 1
CONSULT HANDBOOK
1