GE K0470, Руководство пользователя

Страница: 59 / 78

6 Reference and Specification
K0470 Revision A 6 - 14 [EN] English
Comms range setup is used to re-align the SCPI index (x) to the correct pressure range.
Where Range is index (1)......etc.
8.
Press the top touch area on the screen to change the range value.
9. Use the Up and down arrow to highlight the new Range value.
10. Press the top Measure on the screen to change the range value. The new range value
is set and the screen returns to the COMMS RANGE SETUP screen.
11. If necessary, repeat Steps 7 to 10 to set up other range values.
12. Press the Escape icon to go back to the COMMS RANGE SET UP screen.
13. When complete, press the Escape icon as necessary to return to the Measure screen.
IEEE
Located on the rear panel an external IEEE 488 connection requires:
Ethernet
Located on the rear panel an external Ethernet connection requires the following:
Ethernet Firewall
A firewall protects the Ethernet connection. The firewall is always turned on. The following
ports are unfiltered to allow remote communication and control.
Connector 24-way ‘D’ female wired as IEEE 488 standard
Communications IEEE488 GPIB
Default Address 16
Protocols PACE SCPI
Heritage emulation DPI 142/150, DPI 141
Connector Ethernet RJ45
Protocol SCPI
Terminator CR/LF
Default Address Auto IP (0.0.0.0)
Host name PACExxxxxx ( where xxxxxx = serial number)
Web Password 0268
Access control Open
Reset LAN Settings Selected in Supervisor set-up menu
Port Description
80/tcp http (Web server)
111/tcp rpcbind (RPC for VXI)
111/udp rpcbind (RPC for VXI)
443/tcp https (Web server)