GE JAS02M, Инструкция по использованию, уходу и установке

Страница: 24 / 28

Installation Instructions
(continued)
Installing the Backguard Leveling the Range
1.
Place the backguard on top of
For proper cooking and baking the
the end panels at the rear of the range must be leveled. Leveling
range. legs are located on each corner at
2. Insert two machine screws
through the holes at the bottom of
each end cap. Secure the screws to
the range frame with the hex nuts
provided.
3. Insert two machine screws
through the front of the backguard
at each end. Secure the screws to
the range frame with the hex nuts
provided.
the base of the range.
Install the oven shelves (see use
and care section for instructions).
Put a spirit level or a glass
measuring cup partially filled with
water on one of the oven shelves.
Use a open end wrench or an
adjustable wrench to back out the
four leveling legs two or three turns
each. Now use the wrench to adjust
the leveling legs until the range is
level.
Slide range back towards the wall
being not to damage the
sides or top of the range, or the
adjacent cabinets.
24
—