GE JAS02M, Инструкция по использованию, уходу и установке

Страница: 21 / 28

Anti-Tip Device Installation Instructions
for Device Kit No. WBO6XO1O3
I
●
RANGES CAN TIP
I
●
●
INSTALL ANTI-TIP
DEVICE PACKED WITH
RANGE
●
SEE INSTRUCTIONS
Tools Needed
●
Phillips head screwdriver
●
or adjustable wrench
●
Flat blade screwdriver
Device attaches to floor or wall to
hold either right or left rear
leveler. If
to floor, sure
that screws do not penetrate
electrical wiring or plumbing. If
this cannot be determined, use
shorter screws that will not
penetrate through flooring.
Wall range
Attachment to wall
Fig. 2
Wall plate
--
—
. — —
.-
1. Decide whether the device will 3. Determine whether you will
be installed on the right or left side
anchor the device to the floor or
of range location. to the wall as shown in figure 2.
2.
If the device side of the range
is adjacent to a cabinet, place the
device against back wall and
cabinet as shown in figure 1.
If there is no adjacent cabinet,
determine where the location of the
For greater stability fasten the
device to both the wall and the
floor if possible. Fasten the device
securely with the screws provided.
Screws are self-drilling in wood,
plywood, particle and chip board,
and most metal framing. If attaching
range side (painted outside panel) to masonry you can suitable
-
will be. Place the device with its screws and anchors at hardware
outside edge at this location and
stores. Use a masonry drill to drill
against back wall. See figure 1. the required holes.
4. Using the wrench, back out the
four leg levelers at least two turns.
See your installation guide for
more leveling information before
positioning range.
5. Slide the range into place.
21