GE IDP-1111, Руководство пользователя, Страница: 85 / 114

Chapter 5
Advanced programming
77
Exit
To exit the programming interface, do the following:
1. You can exit the programming interface two ways. Select Exit or go directly to step 2.
2. At the SEE MONITOR FOR MENUS display
on the keypad LCD ( Figure 53 ), press and
hold the seq key on the keypad (if you are
using a GE KTD-405 keypad).
Figure 53. SEE MONITOR FOR MENUS display
3. At the ENTER CAMERA SITE NUMBER
display ( Figure 54 ), press .
Figure 54. ENTER CAMERA SITE NUMBER display
4. At the equipment selection display
( Figure 55 or Figure 56 ), press .
Note: This display will be slightly different
depending on the version of your keypad.
See
Figure 55 and Figure 56 .
Figure 55. Equipment selection display (v1.2.09 or later)
Figure 56. Equipment selection display (v1.1.06 or earlier)
SEE MONITOR FOR MENUS
HOLD SEQ (3 SEC) TO EXIT
ENTER CAMERA SITE
NUMBER _ _ _ BACK
1=SWITCHER/MPLX 2=ALARMS
3=CAMERA EXIT
1=SWITCHER/MPLX 2=ALARMS
3=CAMERA/RCVR EXIT