GE IDP-1111, Руководство пользователя, Страница: 79 / 114

Chapter 5
Advanced programming
71
To access the Power-on and Resume page, select Control and Power-on and Resume .
Figure 47. Power-on and Resume page
Note: Remember to select OK to save any changes you make on the page.
Power-on operation. Power-on defines the first operation that the dome performs after it is powered up
and initialized. Choices are Off (default), Preset, Macro, ShadowTour, and Autopan.
Number (power-on operation). Enter a number for the operation selected under Power-on operation .
Choices are based on the selection made under Power-on operation .
Resume delay. Resume delay is a feature that sets how long the dome is inactive before the Resume
operation is performed. Choices are Off (default), 15 sec, 30 sec, 1 min, 2 min, 3 min, 4 min, and
5 min.
Resume operation. Resume operation defines the operation for the dome to perform after the dome has
been inactive for a specified period of time. Choices are available only if a Resume delay time is
selected and include Preset (default), Macro, ShadowTour, and Autopan.
Note: If the
Resume overrides running operation
feature is enabled (checkbox checked), then the
Resume operation
feature will interrupt presets, tours, autopanning, and alarms. See Priority of dome operations on page 70.
Number (resume operation). Enter a number for the operation selected under Resume operation .
Choices are based on the selection made under Resume operation .
Resume overrides running operation. Resume overrides running operation is a feature that allows the
Resume operation feature to interrupt presets, tours, autopanning, and alarms. See Priority of dome
operations on page 70. Choices are checked and unchecked (default).