GE IDP-1111, Руководство пользователя, Страница: 17 / 114

Chapter 2
Accessing the programming interface
9
4. At the ENTER CAMERA SITE NUMBER
display, enter the number for the camera site
you are programming. This is a 3-digit
number (for example, 007, 021, 243).
You can enter one, two, or three digits and
press
set ( ).
Figure 5. ENTER CAMERA SITE NUMBER display
5. Continue entering commands with the
joystick.
Figure 6. SEE MONITOR FOR MENUS display
6. If passcodes are turned on, they are required. Select your passcode level and enter your passcode
( Figure 7 ). You will be taken to the main programming page. If passcodes are turned off, they are not
required and you will be taken directly to the main programming page.
From the main programming page, you can access any programming parameters that are allowed by
your passcode.
Figure 7. Log on (if passcode required) and main programming pages
ENTER CAMERA SITE
NUMBER _ _ _ BACK
SEE MONITOR FOR MENUS
HOLD SEQ (3 SEC) TO EXIT