GE IDP-1111, Руководство пользователя, Страница: 50 / 114

Legend
User Manual
42
Actions menu
You can program a variety of custom actions for each dome. Your custom actions include 127 preset positions,
16 ShadowTours, 32 macros, and 120 areas. You can edit the title and description of any action and you can
reassign the positions of existing presets.
Remember that the keypad’s joystick will function as a simulated mouse or PTZ controller at different times
during the programming of your actions.
Figure 26. Actions menu
Presets page
There are a total of 127 presets (1 through 127) that you can define for your dome. If you are using presets 62
and 63 for your left and right autopan limits, then you have a total of 125 presets that you can define.
The dome also provides the ability to remap any preset or tour command coming in from a keypad to activate
any of the 127 presets, 16 tours, or 32 macro actions. This enables you to manually initiate any of the expanded
capabilities of the dome from keypad controllers with limited command capability. See
Command Map page
on page 68.
Note: Most keypads have a limited number of preset numbers they can call. If you have a GE KTD-405 keypad with firmware
v1.2.09 or later, and it is operating with Impac RS-485 protocol, then you can call up all 127 preset numbers (1 through
127) directly from the keypad. If, however, you have a GE KTD-405 keypad with an earlier version of firmware, or it is
operating with Digiplex RS-422 protocol, then you can use the keypad to call up only the first 63 preset numbers
(1 through 63). If you are using presets 62 and 63 for your left and right autopan limits, then you have a total of 125 or 61
preset numbers that you can call up from the keypad. To verify your keypad’s version, press and hold the
mon key on
the keypad, until the keypad beeps, then press the >> key.