GE IDP-1111, Руководство пользователя, Страница: 25 / 114

Chapter 4
Basic programming
17
c. Press 3 to select CAMERA.
Note: If you have an older keypad, the LCD will say CYBERDOME, instead of CAMERA, and you will have an
additional self-explanatory screen to step through.
d. Enter the number for the camera site you are programming.
The programming interface will appear on the monitor screen and you will start using the
joystick to enter commands.
e. If passcodes are turned on, select your passcode level and enter your passcode. If passcodes are
turned off, you will be taken directly to the main programming page.
The programming interface will appear on the monitor screen and you will start using the
joystick to enter commands.
2. Select Actions by guiding the joystick to move the cursor over the Actions menu and twisting the
joystick knob.
Figure 10. Preset programming page
3. Select Presets .
4. Select the Edit tab.
5. Select a preset number.
6. Select Program .
7. Use the joystick to pan, tilt, and zoom the camera to the desired view.
8. Press the iris+ or set ( ) key on the keypad to save the preset position or press the iris- or esc key
to cancel the preset position. Both canceling and saving the preset position returns you to the Edit page.
9. After you have saved a preset position, then you can use the features on the Edit , Display , and
Advanced tab pages to customize the preset’s title, duration, and exposure settings. See Presets page on
page 42.