![GE EML835 Скачать руководство пользователя страница 36](http://html.mh-extra.com/html/ge/eml835/eml835_owners-manual_130625036.webp)
36
Possible Causes
Oven temperature too
hot or too cold
Oven thermostat needs
adjustment.
• See the
Adjust the ov
en thermostat―Easy to do y
ourself!
section.
Clock and timer do not
work
Plug on range is not completely
inserted in the electrical outlet.
• Make sure electrical plug is plugged into alive, pr
operly
grounded outlet.
A fuse in your home may be
blown or the circuit breaker
tripped.
• Replace fuse or reset circuit breaker.
Oven controls improperly set.
• See the
Using the clock, timer and convenience outlet
section.
Display goes blank
A fuse in your home may be blownor
the circuit breaker tripped.
• Replace the fuse or reset the circuit breaker.
showing in the display.
• See the
Using the clock, timer and convenience outlet
section.
Oven door is crooked
The door is out of position.
• Because the oven door is removable, it sometimes gets
out of position during installation. To straighten the door,
push down on the high corner.
Oven makes clicking
noise
This is the sound of the heating
cooking functions.
• This is normal.
“F―anda number or
display
You have a function error code.
• Press the
OFF
pad. Put the oven back into operation.
If the function code repeats:
• Disconnect all power to the range for at least 30 seconds
and then reconnect power. If the function error code
repeats, call for service.
• On self-cleaning models, if a function error code appears
during the self-cleaning c
y
cle, check the oven door latch.
The latch may ha
ve been mov
ed, if only slightly, f
rom the
locked position. Make sure the latch is moved to the right
as far as it will go. Press the OFF pad. Allow the oven to
cool for one hour. Put the oven back into operation.
Power outage clock
Power outage or surge.
• Some models will automatically
resume their setting once
the power is restored. On models with a clock,
y
ou must
reset the clock. If the oven was in use,
y
ou must reset it
by p
ressing the OFF pad, setting the clock and resetting
any coo
king function.
Power failure.
• Reset the clock.
Unable to get the display
to show “SF”
Oven control pads were not
pressed properly.
• The
BAKE
and
BROIL
pads must be pressed at the same
time and held for 3 seconds.
Safety Inst
ructions
Operating Inst
ructions
Ca
re and Cleaning
Tr
oubleshooting Tips
Consumer
Suppo
rt
What To Do
Problem
Troubleshooting Tips
Before you call for service...