30
Safety Inst
ructions
Operating Inst
ructions
Ca
re and Cleaning
Tr
oubleshooting Tips
Consumer
Suppo
rt
On glass cooktop models, the oven is
vented through an opening at the rear of
the cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum
foil or any other material.
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable
for these surfaces. Use a clean, hot, damp
cloth to remove soap. Dry with a dry, clean
cloth.
Do not use steel-wood pads, commercial
oven cleaners, cleaning powders or other
abrasive cleaners. They will damage the
surface.
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in
the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel
surface.
cleaner. Rinse and polish with a dry cloth.
In order to do a right assembly of the bowl
and the coil into the cook t op you need to
insert both components together as show n
in the picture.
Avoid inserting components sparely, this will
cause wrong assemble issues.
When using the oven is normal to have an
increase of temperature on the cooktop
surface, based on the fact that the release
of heat from the oven is placed on the back
right burner/coil of the range.
Attention
(on coil models)
BOWL AND COIL ASSEMBLY
(on some models)
Glass Window
(on some models)
Stainless Steel Surfaces
(on some models)
Painted Surfaces
(on some models)
Oven Vent
(on coil models)
Care and cleaning of the range.
