16
The clock must be set to the correct time of
day for the automatic oven timing functions
to work properly. The time of day cannot
be changed during a timed baking or self
cleaning cycle.
Touch the
TIMER
pad.
Touch the number pads until the
amount of time you want shows in the
display. For example, to set 2 hours and
45 minutes, touch
2
,
4
and
5
in that
order. If you make a mistake, touch the
TIMER
pad and begin again.
Touch the
START
pad.
When the Timer reaches:
00
, the control
will beep 3 times followed by one beep
every 6 seconds until the TIMER pad is
touched..
If the display is still showing the time
remaining, you may change it by touching
the
TIMER
pad, then touch the number
pads until the time you want appears in the
display.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the
TIMER
pad and then touching
the number pads to enter the new time you
want.
Touch the
TIMER
pad twice.
Safety Inst
ructions
Operating Inst
ructions
Ca
re and Cleaning
Tr
oubleshoot
ing Tips
Consumer
Suppo
rt
Make sure the clock is set to the
correct time of day.
The Timer is a minute timer only.
The Timer does not control oven
operations. The maximum setting
on the Timer is 9 hours and 59
minutes.
To Set the Clock
Touch the
CLOCK
pad.
Touch the number pads.
Touch the
START
pad.
To Set the Timer
To Reset the Timer
To Cancel the Timer
After touching the
START
pad,
SET
disappears; this tells you the time is
counting down, although the display does
not change until one minute has passed.
Seconds will not be shown in the display
until the last minute is counting down.
The 6-second tone can be canceled by
folowing the steps in the Special features
of your oven control section under Tones at
the End of a Timed Cycle.
Using the clock
and
timer
.
