GE Druck DPI 615 IS, Руководство пользователя

Страница: 12 / 95

3 K0430 Issue No. 2
OPERATOR CONTROLS (Figure 1 and 2)
These divide into two groups, the operator/display controls (Figure 1) and the pressure/
vacuum generation components (Figure 2). The operator controls and a typical display,
common to all instrument versions, is shown below.
1 Display 2 Electrical Measurement Input Sockets 3 Cursor Keys
4 Enter Key 5 Function (soft) Keys 6 Hard Keys 7 On/Off Key
Figure 1 - DPI 610/615 IS Key-pad
DISPLAY
The display and key-pad of the instrument divides into four distinct sections. The two
main sections of the display are used to show an
input and an output . The remaining
two sections show the status display area and define the soft key functions. A typical
display is shown below:
PRESSURE INT
bar
VOLTAGE
V
F2 F1
2
3
4
5
7
6
1
CURRENT
PRESSURE
UNITS
max 30V
TASK: BASIC
DPI 615 IS
PRESSURE INT
bar
VOLTAGE
V
CURRENT
UNITS
PRESSURE
TASK: BASIC
+
-
Input display
Output display
Soft boxes
Status display
INTRODUCTION Summary of Functions