GE CTF878, Руководство по программированию

Страница: 95 / 116

Logging Data 5-5
February 2009
Entering General
Information
Figure 5-5: General Log Format Window
To step through each parameter, press the [
T
] key.
1.
The first prompt asks you to choose between a linear or circular
format for the log.
Note:
A linear log automatically stops when the meter runs out of
memory or the specified
End
time is reached. A circular log
runs continuously until manually stopped, but only the data
from the most recent log cycle is saved.
a.
Use the [
W
] and [
X
] keys to scroll to the appropriate radio
button.
b.
Press
[ENTER]
to confirm your selection.
2.
The next prompt asks you to choose whether the log is to be a
standard or error log.
Note:
A standard log is used to log up to three of the available
measurement data parameters. An error log is used to log any
generated error messages.
a.
Use the [
W
] and [
X
] keys to scroll to the appropriate radio
button.
b.
Press
[ENTER]
to confirm your selection.
Measurements
2003/08/08
End
Start
Activate Cancel
Linear
Standard
Circular
Error
Format
Type
2003/08/08
LOG02A Log Name
60 Logging Interval secs
9:06:06 AM
8:06:06 AM
General