GE CTF878, Руководство по программированию

Страница: 18 / 116

February 2009
1-10 Programming Site Data
Entry Confirmation
•
To confirm the entries and return to Operate mode, press
[F3]
(OK).
•
To leave the window without confirming the entries, press
[F2]
(Cancel) or the
[ESC]
key.
In either case, the CTF878 returns to Operate Mode.
Entering Pipe
Parameters
To enter the Pipe option, scroll to the Pipe tab on the Program Menu
and press
[ENTER]
. (From the Transducer window, you can scroll back
up to the Transducer tab and press the [
X
] arrow key to reach the
Pipe window, and press
[ENTER]
.) The screen appears similar to
Figure 1-9 below. To step through each parameter, press the [
T
] key.
See the Program Menu Map, Figure 1-34 on page 1-37.
Note:
Refer to the installation reference Sound Speeds and Pipe Size
Data (914-004) for additional information about pipe sizes
and sound speeds.
Figure 1-9: Pipe Option Window
Pipe
Transducer Fluid Path
Other
5
Material
OK Cancel
OD, mm
15.71
ODxPI, mm Wall, mm
2
Sound Speed 600 m/s
Transducer/Pipe
Pipe