CAUTION
Place the column where it is protected from damage and in
such a way that it cannot be knocked over to hurt someone or
cause damage.
Using the pivot stand
AxiChrom 70 and 100 columns are delivered with a pivot stand. A pivot stand is also
available as an accessory to the AxiChrom 50 column.
The pivot stand can be used for emptying the column but also during service by locking
the column in an upside down position to facilitate removal of the bottom plate.
WARNING
Keep fingers away from the locking mechanism while rotating the
column, to avoid injury.
Tilting the column tube
1
Release the pin at the back of the vertical stand bar.
2
Tilt the column for emptying or swing the column upside down.
3
Secure the arm again by first pushing and then screwing the pin into the stand arm.
NOTICE
The adapter and top plate assembly must be removed prior to
releasing the pin at the stand for tilting the column.
38
AxiChrom 50, 70 and 100 columns Operating instructions 28-9331-08 AG
4 Getting started
4.6 Routine procedures
