GE AquaTrans AT868, Руководство пользователя

Страница: 64 / 158

Displaying Data 3-3
September 2004
Resetting Totals
To reset the totals, you can use the internal keypad, PanaView ™ or an
external switch. When resetting totals, the totals for both channels
will be reset. Use the appropriate section that follows to reset
totalizers.
Resetting Totalizers Using
the Internal Keypad
Refer to Figure A-4 on page A-4 in Appendix A, Menu Maps .
1.
Press
[ESC]
,
[ENTER]
,
[ESC]
. The meter enters the user program.
2.
Press [
X
] until
RESET
appears and press
[ENTER]
.
3.
Press [
X
] to select
YES
or
NO
and press
[ENTER]
.
If you select
YES
, the AT868 resets the totals for both channels. If you
select
NO
, the totals continue.
4.
To leave the User Program , press [
ESC
].
Resetting Totalizers Using
PanaView™
Refer to Figure F-4 on page F-4 in Appendix F, PanaView™ for
IDM-Combatible Meters .
1.
Open the
System
menu.
2.
Select
Clear Instrument Totalizers
.
3.
PanaView ™ automatically clears the totalizers and exits the
System
menu.
Resetting Totalizers Using
the External Switch
While the meter is operating, press and hold the reset switch for 1
second. Totals will reset to zero and immediately begin to accumulate
again.
Note:
The external totalizer reset switch must be configured as
described on page 2-23.