– 53 –
Freezer Drawer Slide Assemblies
The freezer drawer utilizes 2 closure mechanisms
that automatically pull the drawer shut when it is
within 1 inch of the closed position. The mechanisms
are built into the 2 freezer drawer slide assemblies
and are not replaceable as a separate part.
3. Pull the crossbar to the right then remove it from
the right-side drawer gear.
Plastic Clip
Crossbar
6. Pull the drawer slide out to the stop position.
7. Remove the two T-20 Torx screws from the
drawer slide.
8. Press in the lock tab and pull the drawer slide
straight out from the slide holder.
9. Remove the 4 recessed 1/4-in. hex-head screws
from the slide holder.
10. Pull the slide holder out from the freezer wall.
Drawer Slide
Slide Holder
Lock Tab
Note:
The procedure to remove both drawer slide
assemblies is similar.
4. Remove the three T-20 Torx screws from the
drawer bracket.
5. Lift the drawer bracket from the slide assembly.
Drawer Bracket
Freezer Drawer Closure Mechanism
The freezer drawer is inserted into alignment slots (1
on each side) and attached to the slide assemblies
with 6 bolts (3 on each side).
To remove the freezer drawer slide assemblies:
1. Remove the freezer drawer front. (See
Freezer
Drawer Front
.)
2. Remove the plastic clip from the crossbar.
