GE 5935000E10, Базовое руководство по обслуживанию

Страница: 117 / 778

D
IRECTION
5750007-1EN, R
EV
. 1 LOGIQ E10 B
ASIC
S
ERVICE
M
ANUAL
Chapter 3 LOGIQ E10 Setup 3 - 27
To set lock out and log on :
1.) Navigate to Utility > Admin > Logon .
2.) Under Policies , select Enable Session Timeout .
3.) Under Password Policies , in Session Lock Screen Timeout , select the system idle time for
timeout (lock screen) in minutes. The screen will appear completely black when locked (timeout).
4.) Click Save .
5.) Press or move any button/trackball on the operator panel to display Login window.
6.) On the Login window, enter the user ID, enter the password, and then select Ok .
The user will have access according to the rights in their assigned group.
To set auto logon :
Auto LOGON only works when password policies are disabled and if there is no password assigned to
the user.
1.) Navigate to Utility > Admin > Logon .
2.) Select Auto Logon . The system will start by using the ID of the last operator.
Figure 3-13 Logon