GE 5151481-3 Скачать руководство пользователя страница 95

Страница: 95 / 240

Chapter A3: Worklist

Definium AMX 700 X-Ray System

5161515-1EN

Rev. 6 (10 February 2008)

A3-10

Operator Manual

5. If you selected

Range

for the Date option, enter or select the

From

and

dates.

The current date appears in both the

From

and

fields by default.

To select dates from the calendar:

a) Press the [CALENDAR] button.

Figure A3-5

Calendar button

– The Filter calendar screen appears with the current date selected.

Figure A3-6

Filter calendar screen

b) Press [

] to select the previous month, if necessary.

c) Press [

] to select the next month, if necessary.

d) Press a date to select it.

– The calendar closes automatically when a date is clicked.

6. Enter any

Patient Information

you want to filter by.

You do not need to enter full words or numbers into these text boxes.

Entering more information into these text boxes will reduce the number of results.

Entering less or no information into these text boxes will increase the number of results.

NOTE:

The Patient Information text boxes

are

case sensitive.

7. Press [OK].

The Filter screen closes and the Worklist screen appears with only those procedures that met all of
the filtering criteria.

If no procedures met all the criteria, the Worklist will be blank.

8. Press [REFRESH] to remove the filter.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Содержание 5151481-3

















































































































































































































































Результаты поиска

Содержание 5151481-3

Отзывы:

Похожие инструкции для 5151481-3

Бренды по названию

Популярные бренды

GE 5151481-3, Руководство оператора

Результаты поиска

Содержание 5151481-3

Отзывы:

Похожие инструкции для 5151481-3

Бренды по названию

Популярные бренды