GE Security SymDec 16 plus 4, Руководство пользователя

Страница: 74 / 152

SymDec 16 plus 4
User Manual
64
Streaming
Use this menu to enable streaming output on an IP camera.
Figure 42. The Network/Streaming menu
To receive unicast video from another unit
1. Go to Cameras/IP Camera 1 . Set the source address to the physical address of the unit sending a
unicast video stream. You can repeat this for IP Cameras 2 to 4.
To receive multicast video from different units
1. Navigate to the Network/IP Advanced/Multicast setting . Set the Multicast address of the stream you
are going to receive to 230.123.456.789.
Note: Note that if there are four units sending multicast streams, each unit must have the same multicast stream
address.
2. Navigate to Cameras/IP Camera 1 . Set the source address to the physical address of the unit sending a
multicast video stream. You can repeat this for IP Cameras 2 to 4.
Table 29. The Network/Streaming menu options
Menu Options Settings
Unit 2 Unit Enable or Disable streaming
Camera 1 to 16
IP Address Select the IP address of the camera