GE Security SymDec 16 plus 4, Руководство пользователя

Страница: 38 / 152

SymDec 16 plus 4
User Manual
28
Example
• The DVR IP address is 168.125.115.010
• The Camera IP address is 168.125.115.025 (both in the camera itself and SymDec 16 camera menu)
• The Multicast/Streaming address on both the camera and SymDec 16 should be 230.125.115.025
• If you have a second IP camera: The Camera IP Address could be 168.125.115.026 and the Multicast/
Streaming address would still be 230.125.115.025
How to setup a KTD-405 keypad to work with the SymDec 16
To setup and connect a KTD-405 keypad and a Symdec 16 follow the steps below. You will need to refer to the
KTD-405 user manual (part number 1036547D).
1. Connect a pair of wires from the KTD-405 I/O box to the SymDec 16 Bus 1/485 port.
• KTD-405 I/O box pin RS485 (A) to SymDec 16 Serial I/O Bus 1/485 pin 1 (+).
• KTD-405 I/O box pin RS485 (B) to SymDec 16 Serial I/O Bus 1/485 pin 2 (-).
2. Verify the serial communication settings on Bus 1 of the Symdec 16;
a. Go to the System/Serial Communication Bus 1 menu and verify the following:
• Bus 1 Type: RS-0485
• Protocol: Kalatel
• Baud Rate: 9600
• DVR Addr: 1
3. Enter Zone mode operation on the KTD405 keypad. Please refer to your KTD-405 manual for more
detailed information. Access the KTD-405 zone mode by doing:
a. Hold down the Enter key.
b. Enter programming code: 5-7-9-seq.
c. Change operating mode from Digiplex to Zone mode by the joystick up/down.
d. Press the Fast Forward button.
e. Hold down the Seq button to exit the menu.
f. You should be in Zone mode.
g. Press the Zone button, then the number 1. This will initiate a connection between the SymDec 16
and the KTD-405 keypad.
How to set the IP camera option to a keypad button
The KTD-405 and SymDec 16 should be connected and operational.
1. Hold down the Enter button on the KTD-405.
2. Enter programming code: 1-4-7-6-seq.
3. Press the fast forward button until you get to the Program Soft Keys option.
4. Press the + button.