GE MDS Mercury 900, Справочное руководство

Страница: 51 / 211

42 Mercury Reference Manual 05-4446A01, Rev. E
NOTE:
In the menu descriptions that follow, parameter options/range,
and any default values are displayed at the end of the text
between square brackets. Note that the default setting is
always shown after a semicolon:
[
available settings or range; default setting ]
3.3 BASIC OVERVIEW OF OPERATION
3.3.1 Starting Information Screen
Once you have logged into the Management System, the Starting Infor-
mation Screen (
Figure 3-9 ) appears with an overview of the transceiver
and its current operating conditions.
Figure 3-9. Starting Information Screen
(AP screen shown; Remote similar, differences noted below)
•
Device Mode
—Operating mode of the unit as it relates to the
radio network.
•
Device Name
—This is a user-defined parameter that appears in
the heading of all pages. (To change it, see Network Configura-
tion Menu on Page 45 .)
• Current IP Address —Unit’s IP address [ 169.254.0.2 ]
•
Device Status
—Condition of the unit’s operation as follows:
At Access Point:
• Operational —Unit operating normally.
•
Initializing
—This is the first phase after boot-up.
• Synchronizing —Unit is waiting for the GPS receiver to obtain
a satellite fix and for its internal clock to synchronize to the
GPS timing signals.