GE MDS Mercury 900, Справочное руководство

Страница: 65 / 211

56 Mercury Reference Manual 05-4446A01, Rev. E
• TX Power —Transmit power of the WiFi radio. [ 1 to 18; 15 ]
• NIC in Bridge —When enabled, the WiFi interface is added to the
Network Interface Card bridge, allowing traffic to pass between
the WiFi and the other interfaces (LAN and wireless).
[
enabled, disabled; enabled ]
• Broadcast 802.11 SSID —When enabled, the SSID of the WiFi
Access Point is broadcast over the air so that stations will detect
the AP’s presence. [
enabled, disabled; enabled ]
• 802.11 Station Timeout —Determines how quickly inactive sta-
tions are “aged out” of he WiFi Access Point’s database.
[
1 to 240 mins ; 2 mins ]
3.4.2 Ethernet Port Configuration Menu
The transceiver allows for special control of the Ethernet interface, to
allow traffic awareness and availability of the backhaul network for
redundancy purposes.
NOTE:
The transceiver’s network port supports 10BaseT and
100BaseT connections. Confirm that your hub/switch is
capable of auto-switching data rates.
To prevent excessive Ethernet traffic from degrading perfor-
mance, place the transceiver in a segment, or behind routers.
Invisible place holder
Figure 3-24. Ethernet Port Configuration Menu
• Ethernet Port Enable —Allows enabling/disabling Ethernet traffic
for security purposes. Setting it to enabled enables the port.
[ enabled, disabled; enabled ]
• Ethernet Port Phy Rate —The Ethernet port’s configured speed.