0150-0178F
5
Kalatel DVSe
Rack Mount:
Carefully load the rack so that it remains stable and unlikely to tip
over. The unit is also suitable for desktop installation.
1.4 The Back Panel
ETHERNET
10/100
RELAY
SCSI
IEEE-1394
RS-232
SW 1
PORT 1
PORT 1
OFF
OFF
1 2 3 4
ON
ON
PORT 2
PORT 2
1: SCSI TERMINATION
2: SCSI POWER
3: BUZZER
4: AUX
1
2
2
2
3
4
5
6
7
8
Back Panel Components
1. Cooling Fan:
Do not obstruct.
2. Power Connector, Voltage Selector and On/Off Switch.
3. IEEE-1394 Firewire Ports 1 and 2.
4. 10/100 Ethernet Port.
5. SCSI Ports 1 and 2.
6. Dip Switches (SW1).
7. RS-232 Port.
8. Alarm Out Relay Connection
(Future feature)
.
1.5 Connections
10/100 Ethernet Port
The Ethernet port is used to connect
the DVSe into a network
environment.
Wire Type:
Cat 5.
Connector Type:
RJ-45.
Cable Required:
Ethernet.
SCSI Ports 1 and 2
Connect a SCSI device to one of the
two SCSI ports. Set the dip switches
(SW1) on the back panel. Set
SCSI
Termination
and
SCSI Power
to
On
and
use the Bus Select menu option
to enable this feature.
Connector:
50 pin, high density SCSI-2.
Gender (on unit):
Female.
SCSI ID:
0.
The unit does not currently support multiple SCSI device connections.
