Kalatel DVSe
16
0150-0178F
3.4 Supervisor Menus
The Supervisor menus provides advanced options for the following features:
•
Serial Debug Output.
•
Disk Status.
•
Disk Failure Reset.
The Key Pad buttons provides access and control of the Supervisor Menus. To
access the Supervisor menus press the left and right arrows simultaneously.
•
Up Arrow: Quits the menu.
•
Left Arrow: Move field selection to left.
•
Enter Button: Press to access setup
menu.
Toggles through menu screens
.
•
Right Arrow: Move field selection to right.
•
Down Arrow: Quits the menu.
Serial Debug
Serial Debug output, select yes or no.
Default setting is no. Enabling serial debug
will output debug messages on the RS232
port at 57600 bps. Changing this setting will
cause the unit to restart.
Disk Status
This menu indicates the current disk status.
Disk status is viewable only on this display.
•
N: Normal
•
W: Error writing to Disk
•
R: Error Reading Disk
•
T: Timeout during disk initialization or disk
absent
The letters on the Disk Status screen represent Disk 1 (left) thru Disk 8 (right).
Do not attempt to reset a disk with read/write errors (a
R
or
W
status). This could lead to more disk errors and data loss. Disks
with read/write errors should be replaced.
NOTE
