0150-0178F
9
Kalatel DVSe
2 Hard Drive Installation
This section contains important information on adding or replacing the internal
Disk Drives. Please read the entire section before performing any work.
Caution:
Do not allow any metal object to contact the
motherboard. Do not allow loose screws to become lost inside
the DVSe chassis. Wear an Electro Static Discharge protection
device any time work is being performed inside the unit.
2.1 Opening The DVSe
Before removing the cover, turn off the unit and unplug it. Using a Phillips-head
screwdriver, carefully remove the twelve screws fastening the lid to the chassis.
Save the screws and use them to refasten the lid when finished.
2.2 Identifying The Components
Complete Internal Overview
Mother
Board
Disk Drives
Power
Supply
Drive Support Bracket
