GDZX ZXMD-2001 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 25

GDZX ZXMD-2001 Скачать руководство пользователя страница 8

7

Figure 1

According to the test target, connect one end of the equipped six core test

line with the aviation plug-in signal port on the instrument panel, and connect
the end with the alligator clamp with the signal socket on the junction cabinet of
the density relay according to the test signal. The unused alligator clamp shall
be idle and shall not contact with other alligator clamps. When testing a signal
(one of single alarm, single lock 1 or single lock 2), only the corresponding test
signal shall be received, and "single signal" shall be selected on the operation
interface, and the system will automatically identify.

If the pressure gauge calibration operation needs to be performed, it is

necessary to connect the pressure gauge to be calibrated with the measuring
port on the instrument panel; if the system pressure value correction operation
needs to be performed,it is necessary to connect the high-precision pressure
gauge calibrated by measurement with the measuring port on the instrument
panel as shown in Figure 2.

«
...
6
7
8
9
10
...
»

Содержание ZXMD-2001


























Отзывы:

Нет отзывов