GCC Technologies LaserPro FMC280, Руководство пользователя

Страница: 103 / 129

232002430G(03)
99
Rotary Fixture (Paper Page)
NOTE
This option is only to be used with the Rotary Chuck optional accessory properly set
up. For instructions on how to set up the Rotary Chuck, please refer to Chapter VII of
this manual.
You will need to select this option when processing a job with the optional rotary attachment system to
engrave on round or cylindrical objects. When you have your material and rotary attachment properly set
up:
1) Check the Rotary Fixture function and notice the change in the Paper Size fields under Paper
Size, the X value represents the length of your work piece. Enter the length of your work
piece in this field.
2) Under Paper Size, the Diameter value represents the diameter of your working piece (at the
position you wish to engrave). Enter the diameter of your work piece in this field. Again,
remember the proper diameter value would be the diameter location, at the point of engraving
on your work piece.
3) Under Rotary Parameter, the Offset value represents distance from machine default origin to
where you would like to start laser job. The default value is zero.