GCC Technologies LaserPro FMC280, Руководство пользователя

Страница: 100 / 129

232002430G(03)
96
An example of an image that would benefit from the Cluster function would be: 2 squares to be engraved,
side-by-side on the X-axis with a 20 cm gap in between them. In this scenario, you would want to enable
the Cluster setting and set the distance to a value less than 20. By doing so, the laser will completely
process one square and “leap-frog” to the second square, rather than processing both squares
simultaneously. The resulting processing time is minimized by eliminating the unnecessary travel distance
the laser head needs to make across the X-axis in between squares, if they were to be processed
simultaneously.
Cutting Time Delay (Advanced Page)
The cutting time delay will extend the laser firing time on the first pulse to successfully penetrate the
materials. Drag the time bar to adjust the delay time.
HSU Disable (Advanced Page)
When Black & White mode (Raster function) is selected, the HSU Disable function will automatically checked to
turn off laser cutting head to automatically detect gap between working object and the laser cutting head. If the
processed work area is not even, laser cutting head may collide to working piece, suggest to turn on HSU auto
detection by unchecking HSU Disable function.
Drilling (Advanced Page)
The drilling function is available only for use with AutoCad. Users can insert dots from AutoCad’s tool bar
and use the drilling function to set the drilling time required to create holes.
Use the default “dot” tool (
) from the tool bar to create dots which will be interpreted as drilling
locations. Use the adjusting bar on under the “Drilling” function to set the drilling time (spot delay)
required. The size of the drilled hole can be adjusted by deploying a longer or shorter drilling time.
NOTE
If you wish to use the Border and Cluster function simultaneously, then the Border
Thickness value must be less than the Distance value specified in the Cluster setting.