GCC Technologies LaserPro C180, Руководство пользователя

Страница: 24 / 111

18
LaserPro C180 User Manual
4.1 Machine Setup
4.1.1 Powering Up the Machine
CAUTION
Make sure both the LaserPro C180 and computer are turned off before connecting either
to a power source.
1) Connect the male end of the power cord to a quality surge protector and then connect the
surge protector into a properly grounded outlet.
2) Do the same for the computer system.
3) Connect the female end of the power cord to the machine’s power cable inlet located on the
right side of machine.
NOTE
The LaserPro C180 has been designed to automatically switch from 100~240 VAC.
Tip
Please adjust the LCD Display Screen’s Contrast before plugging in the electrical
cord of your laser. LCD adjustment wheel is located underneath the control panel.
4.1.3 Connecting the Computer
The LaserPro C180 can communicate with a computer through a USB Port or Parallel Printer Port
connection interface. The USB Port connection offers faster file transfer rates and greater flexibility
over the Parallel Printer Port connection. Regardless of the connectivity method chosen, you will need
to connect the respective connection cable from the LaserPro C180 to your computer.
USB Connectivity: Connect the included USB Port Cable to the USB Port on the right side of the
LaserPro C180.
Printer Port Connectivity: Connect the included Printer Port Cable to the Printer Port on the right
side of the LaserPro C180.
NOTE
If you have purchased additional Optional Accessories for the LaserPro C180, please refer
to chapter 7 for instructions on how to properly setup your optional accessories. These
should be setup prior to working with your LaserPro C180.