GCC Technologies EXPERT 24 LX, Руководство пользователя

Страница: 127 / 140

Expert 24 LX User Manual
SignPal 10.5 Instruction A-6 15
7. Apply the contour cut mark of GCC AASII by selecting Effect > Contour Cut Mark.
8. Select “GCC AASII” in SignPal DesignCentral window to create the AAS II registration marks
(4-Point Positioning). Set the vales as 0.1cm or above and click ‘Apply’ in DesignCentral
window. The value is to define the distance between registration marks and image area. If the
value is less than 0.1cm, it is likely that the image will overlap the marks and result in bad
cutting quality.
9. There are three types of GCC AASII registration marks: 4-Point Positioning, Segmental
Positioning, and Multiple Copies. To make ‘Segmental Positioning’ marks, please select “GCC