GCC Technologies Elite 21 Series, Руководство пользователя

Страница: 201 / 311

8-26
Field Description
Add User/Delete User Delay in minutes for first message: Indicates how long the
(con’t) printer should wait before sending a notification message
that an error condition has been detected. The field is
set to 5 minutes by default. Its minimum value is 1
minute and maximum value is 60 minutes.
Delay in minutes for repeat messages: Indicates how long
the printer should wait before sending a repeat
notification of an error condition. This field is set to 30
minutes by default. Its minimum value is 1 minute and
maximum value is 60 minutes.
Note:The printer supports the Notify function only in
Bindery mode.
Create Queue Below is a description of each field:
Queue Name: Enter the name of the new queue. This
field must be completed in order to create a new queue.
The maximum field length is 48 characters.
File Server Volume: Indicates the volume on which the
queue should be created. This field is enabled only if the
current connection is an NDS connection. When
enabled, it contains a list of all available volumes. For
bindery services, the default volume name is SYS.
NDS Context: Specifies the NDS context in which the
queue is created. This field is enabled only when an NDS
connection is being used. When this field first displays, it
will list the NDS context specified in the Add Queue
dialog. If you change it, NWSetup verifies that the new
context exists on the directory tree. Click on OK to
start the verification process.