GCC Technologies AFJ-24S, Руководство пользователя

Страница: 78 / 234

AFJ-24S User Manual
78
4.4 How to Cut 3mm Letters
To obtain good quality output, narrow media is recommended. However, if wide media is used, you
should:
1. Position two pinch rollers as close as possible to both edges of the cutting area.
2. Make sure the loaded media is held flat with equal tension across the platen.
3. Suggested operation settings:
Tool force: 55 gf. (or depending on the material)
Cutting speed: 45-50 cm/sec
Tool up speed: 45-60 cm/sec
Smooth cut: Disable
Quality: Small Letter
4.5 When Completing the Cutting Job
After completing the cutting job, raise the sheet-loading lever, and then remove the material or you can
use the cutoff function.
Cutoff Manually:
You can cut off the finished job by the Safe Blade (a standard accessory) along the knife guide.