74
ENTRA
EB
MODEL
SERIAL NUMBER
DATE
▪
ENTRA EB
USER MANUAL
PURPOSE OF THE MANUAL
These instructions are intended for the manager or user of a Entrance Dynamics automatic doors installation. In order
to obtain the best performance from the automatism, Entrance Dynamics recommends that you read and carefully
follow the user instructions in this manual. This device has been designed for the automation of swinging doors. Any
other use will be considered contrary to the use provided for by the manufacturer who, therefore, cannot be held
responsible. Do not tamper with or modify the internal equipment of the automatism or any of the safety devices
provided in the control unit for any reason. The manufacturer accepts no responsibility in the event the internal parts
of the automatism are modified or tampered with or if safety devices are used in the system which are different from
those indicated by the manufacturer.
Automatism’s security is left to the photocells or to the active safe sensors
that detect the presence of any obstacles
in the area of passage and eventually prevent re-closing of the doors.
As an additional safety, the automatism is equipped with a sophisticated microprocessor device which in the event of
danger limits the pushing force of the door, so as not to constitute a source of danger to persons in transit.
For safety reasons, the automatism is designed so that it is always possible, even in case of power failure and battery,
move the wings by hand
GENERAL NOTES REGARDING SECURITY
The following precautions are an integral and essential part of the product and must be delivered to the user that
must read them carefully as they contain important instructions for use and maintenance safety.
Inside the equipment there are currents and voltages high enough to endanger life.
•
You must keep these instructions and forwarded to all possible future user of the system.
•
The manufacturer can’t be held responsible for any damage caused by improper, incorrect and / or
unreasonable action.
•
Avoid operating in the proximity of hinges and / or moving mechanical parts.
•
Do not enter the range of the door while it is in motion.
•
Do not oppose the movement of the door because it can be dangerous.
•
Do not allow children to play or stay within range of the door.
•
Keep out of the reach of children any control device to prevent the door from being activated involuntarily.
•
All cleaning of the internal parts, maintenance or repair work must be performed by qualified personnel. To
ensure the efficiency of the system and its proper functioning is essential to follow the manufacturer's
instructions by carrying out by professionally qualified due maintenance.
•
Do not clean the cover of the automation by running water directly on the area to be treated.
•
In particular, it is recommended to periodically check the correct operation of all safety devices.
•
Failure to observe with the above may create dangerous situation.
•
In case of assistance, this manual should be made available to the operator who will perform the operation.
•
All installation, maintenance and / or repair must be documented and made available to the user.
USER AND MAINTENANCE MANUAL
OPERATOR “
ENTRA EB
”
FOR SWING DOORS
Содержание ENTRA EB
Страница 1: ...1 ENTRA EB ENTRA EB SWING DOOR OPERATOR INSTALLATION MANUAL ENGLISH ...
Страница 32: ...32 ENTRA EB Arm in closed position ...
Страница 37: ...37 ENTRA EB 4 Refit switching and control board insert cable connector in the dedicated electric clamp ...
Страница 67: ...67 ENTRA EB 28 WIRING AND USE OF INTERLOCK With priority Without priority ...