Parts changing
Titan 165/ 110 Technical Service Manual
Page 3 - 8
© GBC Films Group October 2000
3.3.2 Replacing the upper roller(s)
a) Carefully replace the roller from the control side
of the machine.
b) Replace the upper roller bearings on the control
side journal end. The drive side’s roller bearings
are still in the drive side lift assembly.
c) Replace the roller port plate and secure in place
with the four hex bolts and tighten using a 4 mm
allen wrench.
d) Replace the lift plate assembly by aligning the
proper bearings with thier perspective counter
parts.
e) Secure the lift plate spring and tighten the phillips
head bolt using a #2 phillips head screw driver.
f) Replace the washer and bolt to the lift plate guide
and secure in place with the #2 phillips head screw
driver..
g) Align the lower roller sprockets with their related
sprockets and secure the set screws using a 3
mm allen wrench.
h) Replace the heaters as described in Section 3.2.2.
i) Replace the cabinets as described in Section
3.1.2.
j) Replace the safety shield, feed table and pressure
plate.
P o rt p la te s
S n a p rin g s
R o lle r b e a rin g s
L ift p la te g u id e
L ift p la te a s s e m b ly
L ift p la te s p rin g
U p p e r ro lle r
