Page 4 - 13
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
4.7 Leveling
Leveling of the feeder is very important in the
way the machine performs. Leveling is crucial to the
tram ( tracking ) of the materials through the machine.
Improper leveling, will result in poor
output quality.
INFORMATION
Tools required
• Torpedo level
• ( 2 ) 19 mm open end wrenches
• Second person
Control side to drive side
a) Verify that the feeder has sufficient room around
it to load paper, walk around and service if
necessary.
INFORMATION
One person will read the level while the
other person makes the necessary
adjustments.
b) Position the level on top of the cross bar along
the front side of the feeder. Refer to Figure
4.7.1 Front side
Figure 4.7.1 Front side
Level
c) With two 19 mm wrenches, adjust the foot bolts
so that the front side is even from left to right.
Refer to Figure 4.7.2 Foot bolt
Figure 4.7.2 Foot bolt
Jam nut
Foot
bolt