Page 4 - 10
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
e) Cut the zip ties securing the power cord, the
feeding rollers and the conveyor drive cable.
Zip
ties
Zip
ties
f) Set the power cord and conveyor drive cable
neatly next to the electrical box.
Preparing the laminator
a) Pull both safety latches on the front safety
shield toward the center of the laminator.
Safety latches
d) Use a second person to assist with lifting the
conveyor off of the sheet table. Set the
conveyor near the laminator. Refer to Figure
4.6.2 Sliding the conveyor out.
W A R N I N G
Always use safe and proper lifting practices
when lifting heavy objects. You can become
seriously injured or crushed.
Figure 4.6.2 Sliding the conveyor out
CAUTION
Do not stand the conveyor on its side. Lay
the coveyor flat on the floor. You can cause
damage to the equipment!
