Page 3 of 25
Section
1
1 INTRODUCTION
This manual describes the operation and maintenance of the GBA ST1C-UL integrated
bill validator and stacker.
The GBA ST1C-UL bill acceptor has been specifically designed for use in UL
applications that require a 110VAC operation or 12Vdc and require to accept bill
widths up to 70mm.
The following features include:
Integral 100 - 120 Volt AC power regulator (for AC applications)
Up or Down entry stacking configuration
Fully illuminated Bill Entry Bezel
Easy access to bill path for cleaning and servicing
Cassette options for 100, 300, 600 or 1000 bills, with optional security locks
Two cassette styles offer front or rear note access
Multiple Interface Options
18 pin connector
Optional USB port for programming and connection to host controller
On board Individual bill enable / disable
UL and RoHS compliance
Please note that all references to “ST1C” in this document mean “ST1C-UL version
with integral 100 - 120 Volt AC power regulator”, where applicable.
If you have any questions about this or any other GBA and Microcoin products then
please visit our web sites at
www.globalbillacceptors.com
and
www.microcoin.com
,
or contact your regional sales office for assistance.
1.1
Symbols
The Symbols used in this manual have the following meanings:
Type
Description
Danger
Danger indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
Caution
Caution indicates a potentially hazardous situation or an
unintended use which, if not avoided, could result in death or
serious injury.
Warning
Warning indicates a potentially hazardous situation or an
unintended use which, if not avoided, may result in minor or
moderate injury and/or appreciable material, financial and
environmental damage.
Important paragraphs which must be adhered to in practice
as they enable the product to be used in a technically correct
and efficient manner.
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099
