READ ME FIRST!
Apex
Portable
Particle Counter
Thank you for purchasing the Lighthouse Worldwide Solutions'
Apex
Portable
Particle Counter!
This precision instrument requires minimal set up time and very little routine maintenance.
This document will help get the
Apex
Portable
into use quickly.
Operating Manual is on the included Flash Drive.
I - Unpack and Inspect
Unpack instrument and inspect for damage. Compare package
contents to the pack slip. Report issues to Lighthouse.
Remove clear protective sheet from the instrument face
and USB port.
II - Attach Power Supply
Place instrument on level surface.
Locate instrument’s power supply close to instrument;
connect DC power cord to rear Power Input socket.
Connect the AC cord to Power Supply and AC Input end
to an AC source. Power Supply will charge the battery.
Allow eight-hour battery charge before putting instrument
into service.
III - Apply Power
(See reverse side for additional information)
After charging battery, remove Inlet Cap, attach sample tube to Inlet Barb on top of
Apex
Portable
Press Power Button. After a few seconds, Splash screen will appear followed by Main screen.
Store Inlet Cap in safe place for use when instrument needs to be moved or sent for
annual calibration.
Power
9
Input
Power Button
with cover plate
Filtered Exhaust
Rubber Splash Cover
Folded Out of Way
Clear Protective Sheet
Inlet Cap
Inlet Barb
USB Port
