Page 11 of 25
4.5
Faceplate Options
The same faceplate is used for both 66mm bill guides and 70mm bill guides. The
design of the bill guide and faceplate is symmetric and it can be mounted in either up
or down stacking configuration.
Reminder:
matching internal bill guides need to be mounted to the Lower Sensor Assembly
(refer section 6.2 )
.
The validator can be mounted in three ways
(i)
Standard - the entire faceplate is revealed at the front of the host machine
and can be used to mount information decals.
(ii)
Security – only the raised area of the faceplate and the bill guide is
revealed
(iii)
High security - just the illuminated bill guide is visible.
If you have a custom fitment application, do not hesitate to contact your local
regional office with your requirement.
4.5.2 Down stacker orientation
4.5.1 Up stacker orientation
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099
