Page 12 of 25
4.6
Connections and User Controls
The GBA ST1C includes the following:
Item
Notes
8 pin port for 100 – 120 Volt AC
power and signals to the host
machine.
A connection cable is supplied with the
validator. See section 5.3 for more details
18 pin port for 12Vdc operation and
low voltage signals to the host
machine
See section 5.4 for more details
6 pin port for programming and
calibrating the validator
This requires a programming loom which
connects to a Microcoin VAL 364 USB to
Serial Dongle. See section 4.7
User Push Button and Diagnostic LED
See separate technical bulletin for more
details
USB port
See section 5.5 for more details
DIP Switch
See separate technical bulletin for more
details
Diagnostic LED
Push Button
USB Port
Programming Port
18-Pin Low Voltage
Signal Port
8-Pin Power
& Signal Port
4.6 - Location of connectors and user controls
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099
