Gateway MG1 Скачать руководство пользователя страница 23

Страница: 23 / 192

www.gateway.com

Right

Ventilation fan

Helps cool internal components.

Warning:

Do not work with the notebook resting on your lap.

If the air vents are blocked, the notebook may become hot
enough to harm your skin.

Caution:

Do not block or insert objects into these slots. If these

slots are blocked, your notebook may overheat resulting in
unexpected shutdown or permanent damage to the notebook.

Caution:

Provide adequate space around your notebook so air

vents are not obstructed. Do not use the notebook on a bed,
sofa, rug, or other similar surface.

DVD drive

Insert CDs or DVDs into this drive.

Component

Icon

Description

Memory card
reader

Insert a memory card from a digital camera, MP3 player, PDA,
or cellular telephone into the memory card reader. The
memory card reader supports Memory Stick

, Memory Stick

Pro

, Mini Secure Digital

, MultiMediaCard™,

RS-MultiMediaCard™, Secure Digital™, and xD-Picture Card™
cards.

IEEE 1394 port
(optional)

Plug an IEEE 1394 (also known as Firewire

or i.Link

) device

(such as a digital camcorder or MP3 player) into this optional
4-pin IEEE 1394 port.

Express Card slot

Insert one Type 54 Express Card into this slot.

Headphone jack

Plug amplified speakers or headphones into this jack. The
built-in speakers are turned off when speakers or headphones
are plugged into this jack.

Microphone jack

Plug a microphone into this jack. The built-in microphone is
turned off while an external microphone is connected.

USB port

Plug a USB device (such as a diskette drive, flash drive, printer,
scanner, camera, keyboard, or mouse) into this port.

Ethernet jack

Plug an Ethernet network cable into this jack. Plug the other
end of the cable into a cable modem, DSL modem, or an
Ethernet network jack.

HDMI out jack
(optional)

HDMI

Plug an HDMI device, such as a high definition television, into
this optional jack.

Component

Icon

Description

IEEE 1394 port

Express Card slot

USB port

Memory card reader

Ethernet jack

Microphone jack

Headphone jack

HDMI out jack

eSATA jack

Monitor port

Содержание MG1

































































































































































































Результаты поиска

Содержание MG1

Отзывы:

Gateway MG1, Руководство по обслуживанию, Страница: 23 / 192

Результаты поиска

Содержание MG1

Отзывы: