Gateway MG1, Руководство по обслуживанию, Страница: 146 / 192

CHAPTER 3: Replacing notebook components
140
Screws removed during this task:
To replace the fan(s):
1
Complete the steps in “Preparing the notebook” on page 55 .
2
Remove the cooling assembly by following the instructions in “Replacing the main
cooling assembly” on page 58 .
3
If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in
“Replacing the IEEE 802.11 wireless card” on page 63 .
4
Remove the hard drive by following the instructions in “Replacing the hard drive”
on page 69 .
5
Remove the DVD drive by following the steps in “Replacing the DVD drive” on
page 73 .
6
Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 76 .
7
Remove the keyboard by following the steps in “Replacing the keyboard” on
page 79 .
8
Remove the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 91 .
9
Remove the palm rest by following the steps in “Replacing the palm rest” on
page 104 .
10
Remove the system board by following the steps in “Replacing the system board
and VGA cooling assembly” on page 128 .
2 black M2.5×5 (Fans)
2 black M2×3 (Modem) 1 black M2.5×3 (Right
speaker)
7 black M2.5×5 (System
board)