Gateway ALR 8200 Скачать руководство пользователя страница 71

Страница: 71 / 130

BIOS Setup 59

•

IDE Removable - Select this option of the drive is a
removable disk drive.

•

ATAPI Removable - Select this option if the drive is an
ATAPI removable disk drive.

•

None - “Auto” has been unable to supply the drive type or
select “None” to disable any drive installed.

•

Multi-Sector Transfers: enabling this option allows multiple
sector data transfers on compatible drives. The options are

DISABLED, STANDARD, 2 SECTORS, 4 SECTORS, 8 SECTORS,

and

16 SECTORS.

•

LBA Mode Control: enabling this option causes Logical Block
Addressing to be used in place of Cylinders, Heads and Sectors.
The options are

ENABLED

and

DISABLED.

•

32 Bit I/O: enabling this option allows 32-bit communication
between the CPU and the IDE controller. The options are

ENABLED

and

DISABLED.

•

Transfer Mode: selects the method for moving data to and from
the drive. The options listed are those supported by the drive and
the platform; either

STANDARD, FAST PIO 1, FAST PIO 2, FAST PIO 3,

and

FAST PIO 4;

STANDARD, FAST DMA A, FAST DMA B,

and

FAST DMA F.

•

Ultra DMA Mode: enabling this option allows a faster data
transfer rate with compatible drives. The options are

ENABLED

and

DISABLED.

4079tl.book Page 59 Tuesday, December 22, 1998 2:04 PM

Содержание ALR 8200



































































































































Результаты поиска

Содержание ALR 8200

Отзывы:

Похожие инструкции для ALR 8200

Бренды по названию

Популярные бренды

Gateway ALR 8200, Поддержание и устранение неисправностей

Результаты поиска

Содержание ALR 8200

Отзывы:

Похожие инструкции для ALR 8200

Бренды по названию

Популярные бренды