Gateway 9510, Руководство пользователя

Страница: 17 / 222

12
www.gateway.com
Chapter 2: Setting Up Your Server
Setting up the hardware
To make sure that your working environment is safe:
■
Use a clean, dry, flat, stable surface for your server. Allow at least 6 inches at the
back of the server for cabling and air circulation.
■
Use the instructions on your server’s setup poster to set up your hardware.
■
Use an uninterruptible power supply (UPS) with surge protection for protection
from power outages and power spikes.
■
Avoid subjecting your server to extreme temperature changes. Do not expose your
server to direct sunlight, heating ducts, or other heat-generating objects. Damage
caused by extreme temperatures is not covered by your warranty. As a general rule,
your server is safest at temperatures that are comfortable for you.
■
Keep your server and magnetic media away from equipment that generates
magnetic fields, such as unshielded stereo speakers. Strong magnetic fields can erase
data on both diskettes and hard drives. Even a telephone placed too close to the
server may cause interference.
Converting to a rackmount server
To convert your server to a rackmount configuration, a rackmount conversion kit is
required. To obtain the conversion kit, contact Gateway Customer Care, Gateway Sales,
or visit
accessories.gateway.com . For more information on contacting Customer Care, see
“Telephone support” on page 168.
Contents of the conversion kit
The rackmount conversion kit contains the following:
■
Handles (2)
■
Handle screws (6)
■
Rack stud screws (6)
■
Hinge cover (1)
■
“Suitcase” jumper (1)
■ Front panel sticker (1)
Warning
Your server comes with a 3-wire AC power cords fitted with the correct
plug style for your region. If these plugs do not match the connector
on your UPS or wall outlet, do not attempt to modify the plugs in any
way. Use a UPS or wall outlet that is appropriate for the supplied
AC power cords.
8510725.book Page 12 Tuesday, May 17, 2005 5:45 PM