Gateway 9510, Руководство пользователя

Страница: 157 / 222

152
www.gateway.com
Chapter 7: Troubleshooting
Additional beep codes provided by optional Intel
Management Modules
In addition to the beep codes above, the following additional beep codes are provided if
an Intel Management Module is installed:
LED information
The system board in this server includes LEDs that can assist you in troubleshooting your
system. See the following table for a description of these LEDs and the information they
provide:
Beep Codes Description
1 Control panel CMOS clear has been initiated
1-5-1-1 Processor failure. Reseat or replace the failed processor.
1-5-2-1 No processor is installed or the CPU 1 socket is empty. Reseat or
replace the failed processor.
1-5-2-3 Processor configuration error or CPU 1 socket is empty. Reseat or
replace the failed processor. In a two-processor system, make sure
the processors are identical.
1-5-2-4 Front-side bus select configuration error.
1-5-4-2 DC power unexpectedly lost.
1-5-4-3 Chipset control failure.
1-5-4-4 Power control failure.
LED Name Function Location Color Description
ID Aid in server
identification
from the back
panel Front panel and
left back of
system board Blue On = Server identification
enabled
System Fault Visible fault
warning Front panel and
left back of
system board Green or
Orange
■
On = No fault
■
Green blink = Degraded
■
Orange = Critical error or
non-recoverable
■
Orange blink = Non critical
IDE Activity Front panel Front panel and
left side of
system board Green Blinking = Drive active
8510725.book Page 152 Tuesday, May 17, 2005 5:45 PM