Gateway 901 Series, Руководство по замене

Страница: 7 / 65

2
Replacing Gateway Family Media Center Components
www.gateway.com
Identifying the model
The label on the bottom of the Family Media Center contains information that
identifies the Family Media Center model and its features.
Preparing your work space
Before performing maintenance on the Family Room Media Center, make sure
that your work space and the Family Room Media Center are correctly prepared.
■
Wear a grounding (ESD) wrist strap, and use a grounded or dissipative work
mat.
■
Use a stable and strong table, and make sure that the table top is large
enough to hold each component as you remove it.
■
Use bright lighting to make part identification easier.
■
Keep your work surface free from clutter and dust that may damage
components.
■
Use a magnetized screwdriver for removing screws.
■
When removing components that are attached to the Family Room Media
Center by a cable, unplug the cable before removing the screws, when
possible, to avoid damaging the cable.
■
As you remove components and screws, lay them toward the rear of your
work surface (behind the Family Room Media Center) or far enough to the
side that your arms do not accidentally brush them onto the floor.
Gateway
model
number
8509776.book Page 2 Monday, January 5, 2004 2:54 PM