Gateway 901 Series, Руководство по замене

Страница: 21 / 65

16
Replacing Gateway Family Media Center Components
www.gateway.com
Replacing the processor duct
To replace the processor duct:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
5
Remove the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
6
Remove the DVD drive bracket by following the instructions in “Replacing
the DVD drive” on page 10. You do not need to remove the DVD drive
from the DVD drive bracket.
7
Remove the screw, release the latch, then slide the processor duct forward
to remove.
Release latch
Screw
8509776.book Page 16 Monday, January 5, 2004 2:54 PM